recommended cable trim dimensions 1.22 max .048 max .275 6.99 .054 .003 1.37 .08 .144 3.66 .167 4.24 .144 .001 3.66 .03 catalog p/n: 01431g notes: unless otherwise specified 1. for general series specifications, see sd74-0000. 2. material specifications: brass per astm b16 3. finish specifications: .000030 min. gold per astm b488 over .000080 min. nickel per ams qq-n-290. 4. electric al specifications: current rating: 8 amps 5. for use with 20 awg wire or equivalent. 6. refer to cap10-01 for cable assembly procedure. of a .xxxx [x.xxx] .xxxx er7306 20 awg 8 amp rev 04/11/08 SD01431G right angle solder mount power snap, b 1 sht 1 ronics t lec wallingford, connecticut 06492 62 barnes industrial road north date appd description rev xx/xx/xx xxx date approved 05/16/07 wpm date approved 05/16/07 dcam date approved 03/08/07 psm date drawn by drawing customer winchester electronics corporation e er t inches w angles: 2 scale: 8:1 b per asme y14.5m-1994 unless otherwise specified: dimensions are in inches [mm] tolerances: decimal: .xx [x.x] .01 [0.3] .xxx [x.xx] .005 [0.13] cwb cwb .275 6.99 .218 - .000 +.010 5.54 .00 +.25 across flats
|
